Description
Carbide nail drill bit M-117 in a frustum shape features a red fine cross-cut and a 6 mm working diameter with a 14 mm working length. The broad working surface is designed for removing artificial nail materials and correcting the length and shape of the nail.
The rounded frustum profile provides a convenient working surface for processing larger areas of the nail during gel polish and artificial material removal. The red fine cross-shaped teeth are suitable for controlled filing and correction.
Key Features
-
Model: M-117
-
Product type: Carbide nail drill bit
-
Shape: Frustum
-
Cut type: Cross-shaped teeth
-
Cut color: Red
-
Abrasiveness: Fine
-
Working diameter: 6 mm
-
Working length: 14 mm
-
Material: Carbide
The M-117 model is listed as a red carbide Corn bit measuring 6 × 14 mm and is intended for gel polish removal, artificial nail removal and nail length correction.
Applications
The M-117 carbide bit can be used for:
- Removing gel polish from artificial nails
- Removing gel and other artificial nail materials
- Shortening artificial nail extensions
- Correcting nail length and shape
- Removing excess artificial material during correction
- Working with thickened or keratinized areas
- Selected manicure and pedicure procedures
How to Use
Select the rotation speed according to the material and procedure. Work with controlled movements and light pressure, avoiding prolonged contact in one area.
When working near the natural nail plate, avoid unnecessary contact with healthy nail tissue.
Disinfection
- After use, place the carbide bit into a suitable disinfectant solution. Follow the concentration and exposure time specified by the disinfectant manufacturer.
- Clean the working surface from material residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, an ultrasonic cleaner is recommended.
- Rinse under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization
Autoclave:
Place the cleaned and completely dried bit into a sterilization pouch, seal it and process in an autoclave.
Recommended cycle: 132°C, 2 bar, 20 minutes.
Dry heat:
Place the cleaned and dried bit into a dry-heat sterilizer.
Recommended cycle: 180°C, 60 minutes.
