Description
21350 Carbide Nail Drill Bit features a frustum/conical shape with a red fine cross-cut. It is designed for controlled removal and correction of artificial nail material, including gel and acrylic, as well as correction of extended nails and selected pedicure procedures.
Key Features
-
Frustum / cone shape for controlled material removal
- 5 mm working diameter
- 14 mm working surface length
-
Red marking — fine cut
-
Cross-shaped teeth for controlled cutting
- Carbide construction
- Suitable for e-file manicure and pedicure
- Suitable for gel, acrylic and other artificial nail materials
- Designed for nail correction and selected pedicure procedures
-
2.35 mm shank for compatibility with standard e-file handpieces
Applications
Kristall 21350 is suitable for:
- Removing gel polish and gel
- Correcting extended nails
- Correcting nail length and shape
- Removing lifted artificial material from the sidewall area
- Reducing and refining artificial nail material
- Working with thickened or keratotic nails during pedicure
- Selected callus and hardened-skin procedures
Red Fine Cross-Cut
The red marking indicates a fine cut. The cross-shaped teeth provide controlled material removal and are suitable when a finer cutting action is preferred over a coarse green bit.
How to Use
Insert the bit into a compatible e-file handpiece and select the rotation speed according to the material and procedure. Work with controlled movements and light, even pressure. Avoid prolonged contact with one area and aggressive filing directly on the natural nail plate.
Disinfection & Sterilization
Disinfection:
- After use, place the carbide bit into a suitable disinfectant solution. The concentration and exposure time should follow the instructions of the selected disinfectant.
- Clean the working surface from product residue and filings using a nylon or brass bur-cleaning brush.
- For more effective cleaning, the use of an ultrasonic cleaner is recommended.
- Rinse the bit under running water, followed by distilled water.
- Remove excess water with a clean, dry towel.
Sterilization:
Autoclave: Place the cleaned and dried bit into a sterilization pouch and seal it before placing it in the autoclave.
Sterilization cycle: 132°C, 2 bar, 20 minutes.
Dry heat sterilization: Place the cleaned and dried bit into a dry-heat sterilizer.
Sterilization cycle: 180°C, 60 minutes.
